Service call is FREE with any repair$0 diagnostic when we do the work.
4.8
22 Google reviews
2014Serving Since
90-dayWarranty
SameDay Service
Book online — pick your time in 60 seconds
Pick your appliance and enter your ZIP — we'll take it from there.
Service call from $99 — waived when you proceed with the repair
A Maytag washer visit begins with checking the cycle, water supply, and the way the washer responds to its controls. Owners often call us about a washer that will not drain or spin, or one that stops before the cycle finishes. Fixit Appliance Repair provides independent Maytag washer repair in Charlotte, Matthews, Indian Trail, Midland, and Monroe. Our technicians work on Maytag washers and assess the symptoms before explaining the repair options. The service call is free when you approve the repair. We can also answer calls 24/7 for booking. If the washer is leaking, note where the water appears and stop the cycle if it is safe to do so. For other symptoms, a description of when the problem starts, whether the drum moves, and anything shown on the display can help us prepare for the visit.
Licensed
Updated
Types we service
Coverage across every common variation of this appliance category.
Front-load washers
Top-load HE washers
Washer drainage
Washer spin repair
Washer filling
Washer door locks
Common Maytag washer repair symptoms
If you're noticing any of these, it's time for a diagnostic.
Washer will not drain
Water left in the drum often points to a blocked or kinked drain hose, a clogged pump filter, or a failing drain pump. A washer that drains slowly can also stop before spinning. Note whether the water level changes during the drain portion of the cycle.
Washer will not spin
A washer that fills and washes but leaves clothes wet may have an unbalanced load, a lid or door lock problem, or an issue with the drive motor or belt. Excessive suds can interfere with draining and spinning as well. Notice whether the drum turns at any point in the cycle.
Water leaks during washing
Water around the washer can come from a loose or damaged inlet hose, a drain hose connection, or a worn door boot on a front-load washer. Leaks that appear only while filling or draining can help narrow down the source. Dry the floor if safe and note where the water first appears.
Washer will not start
A washer that does not begin a cycle may have a door or lid that is not locking, an activated control lock, or a problem with the power supply or control system. Check that the door or lid closes fully and that the controls respond. If it still will not start, the lock assembly and controls need assessment.
Likely causes
What we typically find when we diagnose these symptoms.
Drainage obstruction
A kinked drain hose or blockage in the hose or pump filter can slow or prevent water removal. If the path is clear, the drain pump itself may be worn or obstructed. A technician checks the drainage path and pump to identify the source.
Door or lid lock issue
The washer will not run a cycle that requires a locked door or lid if the lock cannot engage or the control does not detect it. Detergent residue around a top-load lid lock can also interfere with operation. The lock assembly, strike, and related controls are checked during diagnosis.
Load and detergent problems
An overloaded or unevenly distributed load can prevent proper spinning and prompt the washer to rebalance. Too much or unsuitable detergent can create excess suds, extending rinsing or interfering with drainage. Use HE detergent where the washer requires it and follow the loading guidance in its manual.
Water supply restriction
Partly closed supply faucets, kinked fill hoses, or a restricted inlet can keep the washer from filling normally. The water inlet valve and its screens are components a technician can check when external supply conditions are correct. Confirm both supply faucets are open and the hoses are not bent.
When to call us right away
A handful of symptoms that mean it's time to stop and bring in a pro.
Water spreading on the floor
If water is actively flooding the area, stop the washer if safe and keep clear of wet electrical connections. Arrange repair once the immediate leak is under control.
Smoke or burning odor
If smoke or a burning smell comes from the washer, stop using it and disconnect power only if the plug and surrounding area are dry and safe to reach. Have the appliance checked before running another cycle.
Electrical concern
A tingling sensation, sparking, or repeated breaker trips calls for stopping use. Do not open the washer or touch its wiring; arrange professional inspection.
Quick checks before you call
Safe checks that may save you a service call. Never open the appliance — visual + power checks only.
1
Check the power
Confirm the washer plug is seated and the outlet is working, using another suitable device if safe. Check the household breaker without opening the washer or touching wiring.
2
Close the door or lid
Make sure laundry is not caught between the door and seal, or directly under a top-load lid. Close it fully and try the cycle again; do not force a lock that will not engage.
3
Inspect the drain hose
Look behind the washer for a sharply bent or pinched drain hose. Straighten an accessible kink without pulling the washer or disconnecting plumbing; leave internal clogs to a technician.
4
Check the water faucets
Verify that the hot and cold supply faucets are fully open and that the visible fill hoses are not kinked. If a hose or connection is wet, avoid adjusting it while water is running.
5
Redistribute the load
If the washer is unbalanced, pause it and spread the items evenly in the drum. Remove some items if the load is packed tightly, then resume according to the washer's controls.
6
Review detergent use
Use HE detergent when required and follow the amount recommended for the load and washer. If there is excess foam, allow the washer to complete its rinse process rather than adding more detergent.
7
Check the display controls
Look for an activated Control Lock or a paused cycle, then consult the owner's manual for the correct control sequence. Record any displayed message exactly; avoid repeated resets if the washer keeps stopping.
The final price depends on the washer and the diagnosis. We explain the proposed work and provide a quote before repairs begin.
Common Maytag washer problems we fix
A washer's symptoms often point toward a particular system, but testing helps distinguish a simple restriction from a component fault.
Will not drain
A kinked or clogged drain hose, blocked pump filter, or failed drain pump can leave water in the drum.
Will not spin
An unbalanced load can interrupt spinning; a worn drive belt, motor issue, or door or lid lock fault can also prevent the drum from turning.
Leaking water
On front-load washers, a damaged door boot can leak around the opening. Inlet hoses, drain connections, and the tub or pump area are other places a technician checks.
Will not fill
Closed faucets, kinked fill hoses, or a restricted water inlet can limit water flow. The inlet valve is checked if the external supply is in order.
Will not start
The door or lid lock, power supply, or control system can keep a cycle from beginning. A lock that does not engage needs inspection rather than force.
Stops mid-cycle
A draining problem, water supply restriction, or control interruption can halt progress. The technician checks the point in the cycle where it stops and the related components.
Loud or shaking operation
Uneven loading or an unstable installation can cause movement and noise. Worn suspension components or a problem with the drum or drive system are also considered.
Clothes remain too wet
Poor drainage, excess suds, an unbalanced load, or a spin-system fault can leave laundry wet at the end of a cycle.
Maytag washer error codes explained
A display code helps describe what the washer detected; it does not identify every failed part by itself. Follow only the owner action listed for the code, and note whether the symptom returns.
What the display codes mean
Each code links to the manufacturer's own page. Not listed? Write it down for the technician.
Maytag washer
20 codes
Maytag washer error codes
Code
What it means
What the manufacturer says to do
Source
F5 E2
Door is not locking properlyApplies to: Front-load washers
What to do: Check nothing blocks the door and it closes completely; press Pause/Cancel twice and Power once to clear.
How Maytag washers are built, and what that means for repairs
Maytag washers include front-load and top-load HE configurations, and their controls differ by model. Door or lid locks, water-level sensing, fill valves, drain pumps, and motor-speed sensing are among the systems that control a cycle. A display message can direct attention to one of these systems, but diagnosis still depends on the washer's actual behavior.
Access to a component depends on the washer's construction and installation. A front-load washer's door boot and lock are arranged differently from a top-load lid lock, and a tightly fitted or stacked installation can affect how a technician reaches the appliance. Our technicians assess the installation and symptoms before explaining the repair.
Maytag washer care that prevents repairs
Small habits help avoid load, suds, and drainage problems. Follow the owner's manual for care specific to your washer.
Use HE detergent
Use the type and amount recommended for the washer and load. Excess suds can prolong rinsing and interfere with drainage.
Balance each load
Distribute items evenly and avoid packing the drum too tightly. This helps reduce imbalance during spinning.
Keep hoses clear
Regularly look for kinks in the visible fill and drain hoses. Replace or reposition a hose only when it can be done safely.
Keep the door area clean
On a front-load washer, wipe the door boot and check for items caught in its folds. Remove residue using the care method in the manual.
Clear detergent residue
Clean the drawer or cartridge as the manual recommends. Buildup can interfere with dispensing or detection.
Check the lid area
Keep objects off the washer lid and clear residue around the lid lock. This helps the lid close and lock properly.
Use washer-cleaning guidance
Run the washer-cleaning cycle as the manual recommends, with the drum empty when required.
Is your Maytag washer worth repairing?
Consider the washer's age and overall condition, what has failed, and how the proposed repair compares with replacing the unit. A focused repair often makes sense when the washer is otherwise in good condition and the diagnosis identifies a repairable issue.
Replacement may be worth considering if the washer has recurring problems, several major systems need attention, or a new unit better suits your energy use and desired features. A technician can explain the diagnosed problem and quote so you can weigh those factors.
More Maytag washer questions
Where is the washer label?
The model and serial label location varies by washer configuration. Check the owner's manual for its location and look around the door opening or lid area without removing panels. You can share the information when booking if it is accessible.
Can I keep using a leaking washer?
Stop the cycle if water is spreading or reaching electrical connections, and avoid running another load until the source is addressed. If the leak is only a small drip, note where it appears and when; a technician can assess the hose, door boot, or drainage area.
What should I do before the visit?
Clear a safe path to the washer and note the cycle stage when the problem occurs. If water is present, keep the area clear and do not remove panels. Have any display message and accessible model and serial label details ready.
Can you repair built-in or older washers?
Fixit Appliance Repair services Maytag washers. Installation access and the washer's condition affect the assessment, so describe any tight fitting or unusual placement when booking. The technician can evaluate the appliance and explain the repair options.
What information helps diagnose the issue?
Describe whether the washer fills, agitates, drains, and spins, and when the trouble begins. Mention unusual noise, leaking, or any message on the display. For a front-load washer, also note whether the door locks; for a top-load washer, note whether the lid locks.
Most washer repairs cost about $179–$434, parts and labor; simple fixes start from about $109. These are approximate typical ranges from completed repairs in the last 12 months, before tax.
How do I prevent washer clogs?
Use HE detergent as directed for your washer, and avoid adding more detergent than the load needs. Regularly check the drain hose for a kink and keep the washer load balanced. If your washer has a detergent drawer, keep it clear of detergent residue.
Why won't my Maytag washer drain?
A kinked or clogged drain hose is a common cause. The drain pump or pump filter can also be involved. Check the hose from outside the washer, and note whether water remains in the drum; a technician can inspect the drainage system if the problem continues.
Do you repair Maytag washers?
Yes. Fixit Appliance Repair provides independent repair service for Maytag washers. Our technicians assess the washer's symptoms, identify the likely cause, and explain the proposed work and quote before repairs begin.
What should I have ready to book?
Have the washer's model and serial label information ready if you can locate it, along with any code shown on the display. It also helps to describe the symptom, when it occurs in the cycle, and whether the washer fills, drains, or spins.
What happens during the repair visit?
The technician asks about the symptoms and checks the washer's operation and the components related to the problem. After diagnosing the issue, we explain the proposed repair and provide a quote before work begins. The service call is free when you approve the repair.
Is the service call free?
Yes, with a repair: the service call is free when you go ahead with the repair. The technician diagnoses the problem and tells you the repair price before any work starts, and you decide.
How long is the warranty on a repair?
Every repair comes with our 90-day parts and labor warranty.
We are an independent appliance repair service and are not affiliated with, authorized by, sponsored by, or endorsed by Maytag or its parent manufacturer.Maytag and all related trademarks are the property of their respective owners. Use of brand names is for informational and identification purposes only and does not imply any endorsement.
