Samsung Oven Repair in Indian Trail, NC — Independent Samsung oven repair from Fixit Appliance Repair, same-day when the schedule allows.
We respond in 1 hour, not days
- Licensed & Insured
- Certified Technicians
- 90-Day Warranty
Service call is FREE with any repair$0 diagnostic when we do the work.
Book online — pick your time in 60 seconds
Pick your appliance and enter your ZIP — we'll take it from there.
Service call from $99 — waived when you proceed with the repair
Pricing
What affects your final bill.
Oven repair, most jobs
about $276–$657 · simple fixes from about $119
What the display codes mean
Each code links to the manufacturer's own page. Not listed? Write it down for the technician.
Samsung range, oven or cooktop
7 codes
| Code | What it means | What the manufacturer says to do | Source |
|---|---|---|---|
| C-10 | Appears during SmartThings self-diagnosis when oven starts very cold/hot (sensor limitation); not a defect unless it appears during cooking on its own | What to do: Can be ignored if oven heats normally; if it appears during cooking, try resetting the oven. | samsung.com(opens the manufacturer's page) |
| C-24 | Oven temperature rising faster than normal, generally because the vent at the back of the cooktop is blocked | What to do: Remove anything covering the vent; open/close the door a few times or turn off and leave the door open 1 minute. | samsung.com(opens the manufacturer's page) |
| bAd LinE | Power connection is not plugged in properly | What to do: Reconnect the power connection; see installation manual or a professional installer. | samsung.com(opens the manufacturer's page) |
| door | Door not closed (or door plunger switch problem) | What to do: Check the door plunger switch and that the door closes all the way; else request service. | samsung.com(opens the manufacturer's page) |
| tESt | Range is in Demo mode; oven and cooktop will not heat | What to do: See user manual for turning Demo mode off. | samsung.com(opens the manufacturer's page) |
| C-F0 | Communication error between components of the range electronicsApplies to: Software-update fix limited to induction models NSI6D*9100, NSI6D*9300, NSI6D*9500 | What to do: Reset power; on induction models NSI6D*9100/9300/9500 update via SmartThings; else request service. | samsung.com(opens the manufacturer's page) |
| dE | Twin Mode partition not installed properlyApplies to: Models with Twin Mode partition | What to do: Remove and reinstall the partition fully, or check nothing presses the partition switch. | samsung.com(opens the manufacturer's page) |
More on Samsung and ovens
Other Samsung appliances
Serving Indian Trail, NC and nearby
Frequently Asked Questions
How much does Samsung oven repair cost?
Most oven repairs cost about $276–$657, parts and labor; simple fixes start from about $119. These are approximate typical ranges from completed repairs in the last 12 months, before tax.
Need Indian Trail, NC appliance repair?
Book online in under a minute, or call now.
Explore more
Other brands we service
We are an independent appliance repair service and are not affiliated with, authorized by, sponsored by, or endorsed by Samsung or its parent manufacturer.Samsung and all related trademarks are the property of their respective owners. Use of brand names is for informational and identification purposes only and does not imply any endorsement.